ACR Electronics GlobalFix Y1-03-0233 Manual do Utilizador descarregar pdf (Página 27)

Y1-03-0233 Rev. D 26

11. Extended GPS test

The beacon may be tested for GPS functionality, however, this may only be

done once in the five-year lifetime of the battery due to the significant drain

on the battery. This test is not necessary at any time in the life of the beacon,

but is made available in the event that the beacon owner wishes to verify

internal GPS engine viability.

An extended GPS test may be invoked by holding the switch in test position

for 10 seconds after Self-Test completes. The display will show the message

LONG GPS DATA TEST START while the internal GPS is acquiring

coordinates data. Once the data is acquired, the display will post the

message GPS TEST √ followed by the LAT/LON coordinates as a

confirmation that the data was successfully acquired.

See Appendix E for digital display information.

26.03.33N

80.10.06W

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 42 43

Sem comentários

ACR Electronics GlobalFix Y1-03-0233 Manual do Utilizador Página 27