ACR Electronics AIS-B - REV C Especificações

10 Y1-03-0223 Rev. D A Nauticast™-B AIS transponder connected to this program looks like this: Configuring the Transponder For instructions on confi

11 Y1-03-0223 Rev. D Device Status The Device Status window shows key status information of the AIS transponder. This information can be used to quick

12 Y1-03-0223 Rev. D Silent With this command you can stop transmissions by using the silent mode. The LEDs will indicate that the AIS device is in si

13 Y1-03-0223 Rev. D 2. Maintenance This menu contains rarely used items. It is turned off by default. This menu can be turned on in the program set

14 Y1-03-0223 Rev. D GPS Status This window shows the status of the internal GPS receiver. A bar chart of satellite signal strength

15 Y1-03-0223 Rev. D The menu looks like this: VDM (Received Data from other Vessels) / VDO (Data from your own Vessel). Choose which messages shou

16 Y1-03-0223 Rev. D AIS Console Log The Console Log is a powerful tool for monitoring AIS traffic. As soon as the window opens it s

17 Y1-03-0223 Rev. D When this window is active, a menu will be visible in the window where you can select what should be shown.

18 Y1-03-0223 Rev. D Modem Data This window shows the state of your Nauticast™-B AIS‟s internal state and the internal settings of the Class B devic

19 Y1-03-0223 Rev. D Start the Demo Mode To replay such a log file, initially a connection to the Demo Mode has to be established. To do so, create

2 Y1-03-0223 Rev. D In the United States WARNING: It is a violation of the rules of the Federal Communications Commission to input an MMSI t

20 Y1-03-0223 Rev. D To use this program with your Nauticast™-B AIS, make sure it is properly connected to your Nauticast™-B AIS. Select one of the a

21 Y1-03-0223 Rev. D Serial - Connect to the Nauticast™-B AIS via a serial RS232 connection o Port name: COMx (select from the drop down list) o

22 Y1-03-0223 Rev. D Minimize All All windows are minimized. Close All Close all currently open windows. List of Open Windows The list contains a

23 Y1-03-0223 Rev. D SECTION 5 - STATUS BAR The status bar at the bottom of the main window displays important information of the program and your tra

24 Y1-03-0223 Rev. D 3. Alarms and Incoming Messages On the far right there are two symbols. When you click on either of them, the appropriate window

25 Y1-03-0223 Rev. D Resizing Handle In the status bar‟s bottom right corner there is a resizing-handle. By dragging the handle you can adjust the siz

26 Y1-03-0223 Rev. D APPENDIX B - SUPPORT, WARRANTY, USEFUL LIFE and NOTICES Support Contact your local dealer for Nauticast™-B AIS support. Please v

3 Y1-03-0223 Rev. D Table of Contents SECTION 1 - INSTALLATION _________________________________________________ 4 SECTION 2 - STARTING THE L

4 Y1-03-0223 Rev. D SECTION 1 - INSTALLATION For detailed instructions on how to install the Link2AIS™ software, please refer to the product support m

5 Y1-03-0223 Rev. D By pressing the button "Clear all settings", all settings regarding this program will be removed from you

6 Y1-03-0223 Rev. D The items in the menu bar appear shaded when the functions are not available, for instance when no connection to the AIS device is

7 Y1-03-0223 Rev. D The symbols are shown in magenta color when selected. Ships are drawn with a bold line when defined as buddy (see later in this ma

8 Y1-03-0223 Rev. D When “Course Up” is selected, your vessel always points up and the north direction is rotated as required. Your c

9 Y1-03-0223 Rev. D The columns show the information of a target (each target takes up one row): Sequential number MMSI of the target Type of AI