ACR Electronics RCL 100 Especificações descarregar pdf (Página 15)

Y1-03-0158G 14

Figure 18

Figure 19

block and screw tightened securely. Gather wires together and install

new cable ties (see Figure 19).

21) Replace the top cover carefully, making sure the partition is

seated in its proper groove and the screw holes at the front match the

metal braces.

22) Reinstall the four (4) long cover screws starting from the

back and work forward, then install the two (2) top screws at each side

(total of 4). Tighten all screws securely, taking care not to over-tighten.

23) The light assembly is ready to be reinstalled on mount.

Reattach control cable and wire power leads. Precautions should be

taken to make power connections as water tight as possible.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

ACR Electronics RCL 100 Especificações Página 15