ACR Electronics Nauticast 2625 Manual de Instalação Página 19
- Página / 83
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Installation Manual 15 Y1-03-0204 Rev.K
3.8 Sensor Software Configuration
3.8.1 Introduction
The AIS NAUTICAST requires a connection to various sensor devices. Sensor Configuration
should enable compatibility with existing navigation devises aboard any vessel.
This chapter deals with several ways to configure the NAUTICAST and to comply with the
requirements of the specific sensor interfaces.
Configuration and display is visible on two screens of the Sensor Configuration Menu. The
NAUTICAST offers the following configuration options:
Set up data speed 4800/9600/38400 baud.
Monitor the connected sensor inputs for each sensor channel.
Verify and edit the Sensor Configuration on the display screen.
Analyze the information received from the connected sensor devices.
Produce an electronic installation report.
Configuration of various NMEA protocols.
The individual options may be repeated until the required configuration for the connected
sensor devices is achieved.
During the configuration process, the NAUTICAST is not operational.
3.8.2 Set up Sensor Speed, Checksum (CRC) and NMEA Talker and Sentence ID
Sensor configuration is available in the AIS software versions higher than 2.0.1.0. It is
accessible via the new submenu „5. Sensor Settings‟ in the Service Password protected
menu: „5. Transponder Configuration‟.
N 1
o
19' E 0
o
13' |1> N/A|2>0.00|3>0.10nm
|----------------------------------
| 5. Transponder Configuration
-----| |
| +- 1. Change User Password
View | +- 2. Region Settings
| +- 3. Alarm Settings
-----| +- 4. Interrogation Settings
| +- 5. Sensor Settings
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM|Select->| | |<-Back
- History of Changes 4
- 1 General Introduction 5
- 1.1 Description of AIS 5
- 1.3 AIS Networks 7
- 1.4 Carriage Requirement 8
- 2 NAUTICAST 9
- 2.1 System Overview 9
- 3 Installation 10
- 3.2 Installation Overview 10
- 3.6 Sensor notes 17
- (or 2,3) 18
- Sensor Configuration Report 23
- 4) N or S (North or South) 25
- 6) E or W (East or West) 25
- RxA in – 30
- RxB in + 30
- TxA out – 30
- TxB out + 30
- 4 Starting the NAUTICAST 37
- 4.3 Entering Ship Settings: 40
- 5 Troubleshooting 45
- 5.2 Alarm Codes 47
- 5.3 Text Messages 48
- NAUTICAST 49
- Basic Kit 49
- 7 Technical Information 50
- 9 Appendix 52
- ACR Electronics 53
- DIMENSIONAL DRAWING 54
- ACR P/N 2610 55
- ACR P/N 2640 56
- WORKBOAT PWR/DATA 57
- GPS/VHF Interface Cable 59
- 10 meters 59
- DRAWING NO 60
- ANTENNA MOUNT 61
- W/ HRDWRE METAL GPS4 61
- ACR ELECTRONICS INC 62
- METAL, GPS 64
- GPS MOUNT - PLASTIC 65
- GPS Deck Mount 66
- Metal 1 x 14 thread 66
- Antenna Width Dimensions: 67
- ACR P/N 2621 69
- Antenna VHF GPS Combo 70
- Included with ACR Part #2624 71
- 5757 Ravenswood Road 72
- Fort Lauderdale, FL 33313 72
- 'ffi 73
- Documentation: 74
- Trade names: 74
- Hamburg 77
- 2009-07-21 77
- EG - Konformitätserklärung 78
- Quick Replacement Guide 83
Manuais e produtos relacionados com Recetor ACR Electronics Nauticast 2625
(100 páginas)Hampton Bay HJC1392A-3 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Hampton Bay HJC1392A-3.
Wir stellen 1 PDF-Handbücher Hampton Bay HJC1392A-3 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienerhandbuch
Comentários a estes Manuais