ACR Electronics SmartReader Plus Manual do Utilizador Página 21

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 20
SmartReader Data Logger
13
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
1.3
SmartReader 1 Temperature Logger
The SmartReader 1 is an easy-to-use logger for recording temperature in a wide range of
applications such as HVAC testing/balancing, property management studies, and
transportation of perishable goods.
Figure 1.1: SmartReader 1
1.3.1 Description
The SmartReader 1 has an on-board thermistor temperature sensor and an external
temperature sensor channel for remote measurements with an optional probe.
1.3.2 Setup
Make sure you have enabled the channels you want to use. If you are not using a channel,
disable it to save logger memory.
Channel
Description
Equation
0
Internal Temperature
45
1
External Temperature
Appendix C
Accessories
The SmartReader 1 Temperature Logger can be used with ET series temperature probes
(refer to Appendix C Thermistor Temperature Probes or any NTC thermistor data). To use an
external temperature probe, simply connect the two wires to the terminals marked "Temp.
Sensor" and activate the external temperature channel. Note that polarity does not matter
when connecting thermistor leads. If you are using shielded cable (recommended for cable
extensions), terminate the shield wire by connecting it to the lower of the two "Temp. Sensor"
Vista de página 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 102 103

Comentários a estes Manuais

Sem comentários