ACR Electronics PLB-350B Especificações descarregar pdf (Página 12)

Y1-03-0241C 11

Figure 4 – GPS Receiver Location

will stop blinking and the red LED will flash once every 2 seconds until

new GPS data is obtained.

9. GPS receiver orientation

When activated, it is critical that you do not cover the beacon with any

body part, water, clothing, etc. The GPS receiver is located under the

bottom portion of the case behind the product logo (see Figure 4).

To ensure optimum performance of the GPS receiver, the beacon needs

to have an unobstructed view of the sky. Avoid submerging the GPS

receiver in water if possible. Water will shield and inhibit the GPS

receiver and may cause difficulties obtaining your GPS coordinates.

Avoid leaning over the beacon to view blinking LED as you may shield

the GPS reception.

10. Turning off the beacon

To deactivate your beacon, depress the ON/OFF ( ) button for 1 second.

Once the beacon is deactivated, all blinking LED’s will stop, signifying that

the beacon is no longer sending your distress message.

If deactivation should fail, remove the six screws holding the unit together

and unplug the battery to disable the unit. Return the beacon to ACR

Electronics for service.

NOTE:

Leave beacon on until rescued. Turning beacon off will prolong or

prevent rescue. Repeated activations could be viewed as a hoax.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Sem comentários

ACR Electronics PLB-350B Especificações Página 12